Dipfit W CPA530
Suspension assembly.
Electrode: 1x, 120mm, PG 13,5
Application: flow channel, tanks,
bassin.
Electrode fitting: Bajonet, PPS.
Documents / Manuals / Software
-
Technical Information CPA 530
Assembly
Technical Information (TI) -
Operating Instructions CPA 530
Immersion Assembly for pH/Redox Measurement
Operating Instruction (BA) -
pH 測定セレクションガイド
産業プロセスにおける pH 測定
Competence Brochure (CP)08/15Japanese -
CP00010C pH measurement in industrial processes for US market
Selection and engineering guide for your industry and application
Competence Brochure (CP)04/15English -
Measurement and control aspect of pH using inductively coupled with
bidirectional Memosens technology in flue gas desulfurization process
White Paper CP971C pH measurement and control in a power utility is an
integral part of process. The scrubber efficiency is highlydependent on
the pH. Numerous opportunities were revealed for saving time, as well as
the cost and materials in power plants. In afossil fuel power plant,
the
chemical energy stored in coal, oil, natural gas, shale oil, oxygen and
air
is converted into thermal, mechanical and finally into electrical
energy. In
other words, water is heated to steam, which spins a steam turbine. The
steam turbine drives an electrical generator.Competence Brochure (CP)04/11English -
CP01202C pH Sensors:Calibrate, clean, perform a calibration check
or...?
This white paper will address
Knowing when to do a pH sensor calibration versus a calibration
check
How to properly clean a pH sensor
How to perform a pH sensor calibration
A decision tree for step by step guidanceCompetence Brochure (CP)02/12English
Accessories / Spare parts
-
-
Nr 130,140,150 Order code 50044657
-
Nr 130,140,150 Order code 50044658
-
-
-
Nr 120 Order code 50009964
-
Nr 120 Order code 50010365
o-ring ID17.17 W1.78
-
-
-
Nr 230 Order code 50012186
o-ring ID59.7 W5.3 EPDM
-
-
-
Nr 10 Order code 50034737
-
-
-
Nr 20 Order code 50041208
-
-
-
Nr 30 Order code 50041210
-
-
-
Nr 40 Order code 50056187
Electrode holder CPA510/530
-
-
-
Nr 50 Order code 50041256
-
-
-
Nr 60 Order code 50053069
-
-
-
Nr 70 Order code 51502169
Lower part DIPSYS holder
-
-
-
Nr 80 Order code 50045878
-
-
-
Nr 90 Order code 50044516
-
-
-
Nr 100 Order code 50045879
-
-
-
Nr 160 Order code 50015203
-
-
-
Nr 110 Order code 50044527
cutting ring
-
-
-
Nr 170 Order code 50045895
-
-
-
Nr 180 Order code 50012207
flange D63 NW50
-
-
-
Nr 190 Order code 50043906
-
-
-
Nr 200 Order code 50012391
tube 14x2
-
-
-
Nr 210 Order code 50059498
protection cap
-
-
-
Nr 220 Order code 50008948
-
-
-
Nr 240 Order code 50010744
-
-
-
Nr 250 Order code 50043907
-
-
-
Nr 260 Order code 50012209
flange bushing
-
-
-
Nr 270 Order code 50009339
-
-
-
Nr 280 Order code 50045880
-
-
-
Nr 290 Order code 50009337
-
-
-
Nr 300 Order code 50009424
-
-
-
Nr 310 Order code 50008958
-
-
-
Nr 320 Order code 50054034
holding ring
-
-
-
Nr 330 Order code 50054031
-
-
-
Nr 340 Order code 50042931
-
-
Successor
