Try searching by key words, order- or product code or serial number e.g. “CM442” or “Technical information”
Enter at least 2 characters to start the search.
Flow measurement

Flow measurement for liquids, gases and steam

Product overview for applications in liquids, gases and steam

Consistent product quality, safety, process optimization and environmental protection – these are only a few reasons why industrial flow measurement is becoming more important all the time. Water, natural gas, steam, mineral oil, chemicals are some of the fluids that have to be measured day in, day out. There is no single, across-the-board technology suitable for all these applications, so you can choose the flowmeter best suited to your process needs from our comprehensive product basket.

Benefits

  • From the communication-capable single measuring point to the complete solution for higher-level control systems: you can always rely on the fact that we customize our products to your process requirements.

  • Together with automated process control and state-of-the-art communication interfaces (fieldbus systems), flow metering has advanced into more and more new fields of application in recent years.

  • You can choose among various measuring principles - electromagnetic measuring of volume flow, mass flow based on either the Coriolis or thermal principle, measuring of volume flow based on the vortex or ultrasonic principle.

Frequently asked questions

  • How do I connect to the Webserver on an Endress+Hauser flowmeter?

    To connect to a Proline 100/300/400/500 (4-wire) flowmeter via the webserver using the RJ45 port:

    a. Connect a laptop to the flowmeter using an...

  • How do I download and register DeviceCare?

    For specific instructions on how to install and register DeviceCare, please contact us or raise a support case in our service portal.

  • I have erratic readings on my Promag electromagnetic flowmeter, what is the cause and solution?

    The most common causes for erratic readings are:

    a. Poor grounding

    b. High levels of solids/entrained gas

    Please ensure your meter is connected to a...

  • What is the best flowmeter for steam?

    Endress+Hauser recommends the Prowirl F 200 for steam applications due to the robust resistance to water hammer, optional integrated pressure and...

  • What does error #912 mean on my coriolis mass flow meter?

    Error #912 on a coriolis mass flow meter is a fluid inhomogeneous warning that normally means you have entrained gas in the liquid causing two-...

Products

Filter products

Downloads

    Flow measuring technologies for liquids, gases and steam

    Products and services of our flow measuring technologies for liquids, gases and steam at a glance

    Proline in industries - the ideal device for each industry

    eBook: Check out the benefits of the new Proline, have look at our industry-optimized product portfolio, and profit from additional information such as films and a download function for brochures.